> cat

safe and effective for all pets 5 pounds and up. features the deluxe ultralight receiver with four levels of adjustable correction. perfect for any yard up to 20 acres. the best most advanced cat fence on the market today. the premium underground cat containment fence by petsafe is the perfect choice for any cat owner. the premium in-ground cat fence comes with a deluxe transmitter and a specially designed cat fence receiver collar. with four levels of adjustable correction plus a tone-only mode this is a most versatile and advanced receiver and transmitter system and is specifically designed for your cat! with this system you can increase or decrease the correction to meet your cat`s training needs. this underground cat fence allows you to contain cats of all sizes within the same fence. the petsafe cat fence can be used with several cats with the separate purchase of additional receiver collars. the fence receiver is light and durable- perfect for a older or smaller cat and when set at a correction level 4 strong enough for the largest and most stubborn cat. the specially designed cat safety collar features nylon web construction with an elastic safety strip that will stretch in those instances where your cat is exploring in a tight place. the premium in-ground cat fence receiver has a low battery indicator light on the collar progressive correction which will give a stronger correction if your cat does not retreat run through prevention which will give your cat an immediate correction if he tries to run out of the fence and a safety shut off. after 25 seconds of continuously being in the boundary area the receiver will reset itself allowing your cat 10 seconds to return inside the boundary. other safety features include protection against false signals through an asics chip which is the only microprocessor built specifically for the pet industry by petsafe. the asics chip has 3 000 filters to prevent false signals from causing your cat an unnecessary correction. lightning surge protection for storm-prone areas is built-in and the system comes with an easy-to-follow operation manual and video. the petsafe deluxe underground cat fence makes it easy to train your cat. by spending just a few minutes a day working with your cat it can be fully trained to its fence in a few weeks. you can contain as many cats as you want in the same system as long as they are each wearing a petsafe receiver collar. additional petsafe underground cat fence receivers are available separately if you have more than one cat.

Cat Walk Petit (Black): -1 tower (12"D x 22"L x 72"H) with a 6" lip -1 tunnel (12" W x 96"L x 15"H) -1 enclosure (46"D x 48"L x 72"H) -6 adjustable shelves -6 planks of cedar for the floor -1 door (24"W x 60"H) -Pliers, fasteners and instructions. All outside cat enclosures by The Cat's Den are designed to prevent escape, while keeping your cat safe and healthy. Fence systems sometimes allow an intrepid cat a means to escape, either through a gap at the bottom of the fence or over the top of the fence. Creating a perfect closed system, the Cat's Den stays away from wooden structures to make the enclosure more attractive. Using a thicker wire for the mesh, the enclosure is able to support itself. Only the larger enclosures will need a little bit of support. The Cat's Den uses galvanized mesh that has a 2" x 2" mesh. By using galvanized mesh, the rust factor is eliminated. Cedar wood is used for the flooring and shelves, to eliminate rotting. The Cat's Den is a long term investment that will not need any maintenance to remain a perfect place for your cat for many years. The tunnels are designed in a way so that they can be attached to any part of the enclosure very easily, creating a fully enclosed cat run. More robust than an open top fence system resting on the ground, the shape of the tunnel is built to withstand a great deal of pressure on it. For example, if a dog jumps on a tunnel, it will support the weight. Also the peak of the roof will assist in allowing the snow to fall off the run. They were designed 12" wide as to allow two cats to pass each other with perfect ease. The Cat's Den was not only designed to look attractive in your yard but also to go with you when you move. With the clip remover, the enclosure can be easily disassembled, moved to a new location and re-assembled using new clips. All enclosure kits include cedar wood for floor and shelves as well as pliers, fasteners and step by step instructions.

Very Unique and Special Fortune Cat Pendant Necklace Cat Charm is Heavily Plated with Gold and adorned with Red Czech Rhinestone Accents Lucky Gemstone Donut made from Genuine and Natural Black Onyx Gemstone Pendant Total Size: 2 inches Comes with 2mm Popular 18 inch Rubber Cord with 925 Sterling Silver bail closure. Absolutely Unique and One of the Kind Fortune Cat Pendant. It is Very Attractive and Eye Catching and holds Genuine and Natural Lucky Donut made from Black Onyx Gemstone Crystal. Fortune Cat usually holds lucky coin for good luck and wealth, and our Gemstone Donut stands as Lucky Coin which is strongly grabbed by the Cat, and brings Good Luck Powers flow to it's owner. This Lucky Fortune Cat pendant is Wealth and Spiritual Protection Talisman. It is Spiritual Protection Talisman because it holds Black Onyx Lucky Donut and this is what it Gemstone stands for. Comes with Very Popular 18 inch rubber cord, which has 925 Sterling Silver bail closure. You may always exchange the cord for any chain or cord of your choice. Fortune Cat Legend and Meaning: Fortune Cat Symbol comes from Asia and mainly considered Very Lucky in Japanese society. You will see the cat displayed in stores and in restaurants, in fact many businesses have the fortune cat on show to beckon in new customers. The legend of Fortune Cat is about poor women, which had nothing to eat and wanted to sell her cat to survive. Then she had a Dream, in which her Cat appeared and showed her the way to create a sculpture of it's self. The women did everything the way she saw in her dream and was able to sell the sculpture. Then these Cat sculptures became very popular and she was able to open her own business and become very wealthy and prosperous. Fortune Cat also created as Coin Banks for it's way to be Lucky in Financial situations. Many believe that Fortune Cat brings Prosperity, Wealth, Wisdom and Abundance.

Cat Walk (Black): -1 tower (12"D x 22"L x 96"H) with a 6" lip -1 tunnel (12" W x 96"L x 15"H) -1 enclosure (46"D x 48"L x 96"H) -7 adjustable shelves -6 planks of cedar for the floor -1 door (24"W x 60"H) -Pliers, fasteners and instructions. All outside cat enclosures by The Cat's Den are designed to prevent escape, while keeping your cat safe and healthy. Fence systems sometimes allow an intrepid cat a means to escape, either through a gap at the bottom of the fence or over the top of the fence. Creating a perfect closed system, the Cat's Den stays away from wooden structures to make the enclosure more attractive. Using a thicker wire for the mesh, the enclosure is able to support itself. Only the larger enclosures will need a little bit of support. The Cat's Den uses galvanized mesh that has a 2" x 2" mesh. By using galvanized mesh, the rust factor is eliminated. Cedar wood is used for the flooring and shelves, to eliminate rotting. The Cat's Den is a long term investment that will not need any maintenance to remain a perfect place for your cat for many years. The tunnels are designed in a way so that they can be attached to any part of the enclosure very easily, creating a fully enclosed cat run. More robust than an open top fence system resting on the ground, the shape of the tunnel is built to withstand a great deal of pressure on it. For example, if a dog jumps on a tunnel, it will support the weight. Also the peak of the roof will assist in allowing the snow to fall off the run. They were designed 12" wide as to allow two cats to pass each other with perfect ease. The Cat's Den was not only designed to look attractive in your yard but also to go with you when you move. With the clip remover, the enclosure can be easily disassembled, moved to a new location and re-assembled using new clips. All enclosure kits include cedar wood for floor and shelves as well as pliers, fasteners and step by step instructions.

Not only for small cats! Your cat will use it for scratching as well as sleeping. Our small cat condo looks great in any living room. Your kitty will appreciate your good taste. Is my cat going to like the padded scratching pads? Not only does the fabric look great in your home, but your cat will enjoy digging their claws into our specially designed foam layer. It's great for the health of their claws! Will the fabric be durable? Yes. We use special cross-woven fabric that is highly durable and does not unravel when scratched by your cat. If you have a ambitious scratcher, you can rotate the pads to ensure even wear. In special cases of long term heavy use, the foam scratching pads can be replaced. Isn't carpet perfect for cats? By looking at the selection at your local pet store, you'd think so! We've found that cats enjoy our cross-woven padded scratching pads just as much as they enjoy carpet. The foam element really ads a lot to their scratching experience. Not only can you kitty enjoy this modern look, but you can as well. That's something those carpeted condos just can't offer. . Are your modern cat condos easy to keep clean? A: They are really easy to keep clean with periodic vacuuming. Our recommendation is to use a fabric roller for quick cleaning. Q. Is it easy to assemble? A: Yes. Our cat furniture uses high quality hardware to assemble and our unique patent pending foam scratching pad design makes our furniture super easy to assemble. Q. Are your furniture pieces sturdy? A: Yes. Not only can your cat sit on our furniture, but you can too! Q. How can I be sure my cat will like this furniture? A: Some cats can be fickle and won't immediately appreciate their cool new furniture. Generally, cats need to understand that a new piece of furniture is for them. Sometimes it can take a little time to adjust (and to stop scratching your favorite sofa!). We recommend positively re-enforcing their usage of our Modern Cat Condo.

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Cat Walk Petit (Galvanized): -1 tower (12"D x 22"L x 72"H) with a 6" lip -1 tunnel (12" W x 96"L x 15"H) -1 enclosure (46"D x 48"L x 72"H) -6 adjustable shelves -6 planks of cedar for the floor -1 door (24"W x 60"H) -Pliers, fasteners and instructions. All outside cat enclosures by The Cat's Den are designed to prevent escape, while keeping your cat safe and healthy. Fence systems sometimes allow an intrepid cat a means to escape, either through a gap at the bottom of the fence or over the top of the fence. Creating a perfect closed system, the Cat's Den stays away from wooden structures to make the enclosure more attractive. Using a thicker wire for the mesh, the enclosure is able to support itself. Only the larger enclosures will need a little bit of support. The Cat's Den uses galvanized mesh that has a 2" x 2" mesh. By using galvanized mesh, the rust factor is eliminated. Cedar wood is used for the flooring and shelves, to eliminate rotting. The Cat's Den is a long term investment that will not need any maintenance to remain a perfect place for your cat for many years. The tunnels are designed in a way so that they can be attached to any part of the enclosure very easily, creating a fully enclosed cat run. More robust than an open top fence system resting on the ground, the shape of the tunnel is built to withstand a great deal of pressure on it. For example, if a dog jumps on a tunnel, it will support the weight. Also the peak of the roof will assist in allowing the snow to fall off the run. They were designed 12" wide as to allow two cats to pass each other with perfect ease. The Cat's Den was not only designed to look attractive in your yard but also to go with you when you move. With the clip remover, the enclosure can be easily disassembled, moved to a new location and re-assembled using new clips. All enclosure kits include cedar wood for floor and shelves as well as pliers, fasteners and step by step instructions.

Cat Mix, 100 grams Cat Mix100 gramsItem Catalog Number: 01003 Animals have unique physiological structures, and therefore they need specific food and nutrients to remain in optimal health. No longer considered just animals, household pets are family members who require special attention. Filling the need, the pet food industry has grown tremendously over the years. Cats have been domesticated since early times, essentially to catch rats and mice. Today, they are mainly household pets that, like dogs, require special attention when it comes to their nutrition and care. Cats are carnivorous. But unlike dogs that can eat some plant-based foods, cats need animal protein to survive. Amino acids like taurine and arginine are important to a cat’s health, and without them cats could die. Taurine, for one, is a must for heart, kidney, and eye health. Arginine detoxifies ammonia in cats’ kidneys and is also important for heart and pancreatic function and keeping the gut healthy. The essential fatty acid, arachidonic acid, is another must for cats; it is used in every cell in the body. And, just like humans, they need B vitamins to support their cardiovascular system. Cats also have problems metabolizing certain amino acids from other nutrients, like the conversion of niacin to tryptophan, or vitamin A from beta carotene. For that reason cats have more stringent nutritional requirements than omnivores such as dogs and humans. Supplement Facts Serving Size 2 scoops (approximately 1.135 grams) Servings Per Container approximately 88 Amount Per Serving Antioxidants   Vi tamin C 25 mg Vitamin E (succinate) 5 IU Green Tea Extract [std. for 20% polyphenols (200 mcg)] 1 mg Super Nutrition   Labia tae Extract (from rosemary, thyme and sage) 10 mg Essential Vitamins   B1 (thiamin HCl) 2 mg B-2 (riboflavin) 1 mg B-3 (niacin) 2.5 mg B-5 (pantothenic acid) 2 mg B-6 (pyridoxine HCl) 2 mg B-12 (methylcobalamin) 2 mcg Folic acid 500 mcg Amino Acids   L-Taurine

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dr. Carols VitaLife is a combination of over 45 different vitamins, minerals, herbs, amino acids, anti-oxidants, anti-aging factors, essential fatty acids and digestive enzymes designed to extend your pet's healthy years and optimize quality of life. Anti-oxidants, including Vitamins A, C, and E, as well as the full spectrum of B-Complex Vitamins, enhance energy levels. Colostrum boosts the immune system and Glucosamine supports healthy bones and joints. Essential Fatty Acids promote healthy skin and haircoats, in addition to supporting the heart and brain. Digestive enzymes help your pets body utilize the nutrients you feed them. The AM formula contains essentials that energize your pets body and prepare him for the day ahead. The PM formula is soothing: the nutrients prepare your pet for a restful sleep so he wakes up feeling refreshed. Its the most comprehensive approach to longevity available. Its safe, effective and its easy; everything your pet needs, all in one easy-to-give product. How Can Dr. Carols VitaLife Help My Cat? Nutrition is the critical key when it comes to our health. Thats just as true for pets as is is for people. We all have specific nutritional needs. Since pets age 7 times faster than we do, proper nutritional supplementation can make a real difference in the quality of your pet's life and significantly extend your pet's healthy years. Eating right and exercising enhances our health. It helps people and pets look good and feel better. Many of us take a variety of vitamins and supplements to help us enjoy a longer, healthier life- it only makes sense that pets need vitamins too. According to Dr. Lisa Newell, D.V.M. and veterinarian to the stars in Malibu, California Dr. Carols VitaLife is made of natural, top quality ingredients; its everything pet's need in one easy to give treat.

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Cat Walk (Galvanized): -1 tower (12"D x 22"L x 96"H) with a 6" lip -1 tunnel (12" W x 96"L x 15"H) -1 enclosure (46"D x 48"L x 96"H) -7 adjustable shelves -6 planks of cedar for the floor -1 door (24"W x 60"H) -Pliers, fasteners and instructions. All outside cat enclosures by The Cat's Den are designed to prevent escape, while keeping your cat safe and healthy. Fence systems sometimes allow an intrepid cat a means to escape, either through a gap at the bottom of the fence or over the top of the fence. Creating a perfect closed system, the Cat's Den stays away from wooden structures to make the enclosure more attractive. Using a thicker wire for the mesh, the enclosure is able to support itself. Only the larger enclosures will need a little bit of support. The Cat's Den uses galvanized mesh that has a 2" x 2" mesh. By using galvanized mesh, the rust factor is eliminated. Cedar wood is used for the flooring and shelves, to eliminate rotting. The Cat's Den is a long term investment that will not need any maintenance to remain a perfect place for your cat for many years. The tunnels are designed in a way so that they can be attached to any part of the enclosure very easily, creating a fully enclosed cat run. More robust than an open top fence system resting on the ground, the shape of the tunnel is built to withstand a great deal of pressure on it. For example, if a dog jumps on a tunnel, it will support the weight. Also the peak of the roof will assist in allowing the snow to fall off the run. They were designed 12" wide as to allow two cats to pass each other with perfect ease. The Cat's Den was not only designed to look attractive in your yard but also to go with you when you move. With the clip remover, the enclosure can be easily disassembled, moved to a new location and re-assembled using new clips. All enclosure kits include cedar wood for floor and shelves as well as pliers, fasteners and step by step instructions.

The Cat Quarters is a functional, all-inclusive design for the convenience of you and your pet. It combines food and water bowls, litter box enclosure and lounge top all in one luxurious piece of furniture. The Cat Quarters adds style to any room while conserving space and providing essential amenities for your kitty. The Cat Quarters can provide personal space for a cat in a spacious family room or conserve space in a small apartment. It can be placed in front of a sunny window or in a secluded spot. You will admire the Cat Quarters and your cat will find it irresistible and consider it their space. The Inspired Pet Designs Cat Quarters is Made in the USA guaranteeing quality craftsmanship, materials, and manufacturing standards. The Cat Quarters is constructed in a wood alternative, which is highly durable and resistant to moisture and odors. The Cat Quarters has been designed for cats, but is made with the same quality as human-grade furniture. The top of the unit opens to provide access to the litter box enclosure with heavy-duty hinges and the litter box is set within a frame to limit movement and spills. Heavy weight stainless steel bowls are also set within frames and are removable for ease of cleaning. The lounge top cat bed is made from high-density foam covered in Sunbrella fabric, which also resists moisture, dirt, stains, and odors. The fabric can be easily cleaned with a damp cloth and fur can be removed with a lint roller or hand vacuum if needed. Replacement tops can be purchased if the need should ever arise and are very easily installed. The Inspired Pet Designs Cat Quarters comes to you fully assembled. The all-inclusive Cat Quarters comes with a PetMate Litter Box, heavyweight Stainless Steel Bowls, and furniture levelers on the base of the unit. The levelers can be used to compensate for uneven flooring. Castors are an available option for ease of movement of the unit. Dimensions: 18.25H x 26L x 21.75W

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us

Dyno-BOOST is a fully adjustable, programmed performance control unit designed for all fuel injected sleds, simply wires inline with the factory harness of the IAT (Intake Air Temperature) sensor and into the plug of Oxygen sensor on models fitted with it. You will receive crisp acceleration, much more horsepower and torque, lower quarter mile times and surprisingly increased throttle response. Installation is easy, no - special tools or expertise required. Gain +15-35 additional HP, and extremely dynamic acceleration by up to 30 % in contrast to factory engine performance. It works in conjunction with stock ECU and will not affect engine reliability or endurance. Original ECU program is in process, but the signal of Dyno-BOOST fouls the ECU resulting richer air/fuel ratio, accordingly delivering peak horsepower, torque and acceleration. Dyno-BOOST will supply modified signals to your sled's ECU. The ECU then adjusts air/fuel ratio and secondarily timing advance curves to new performance settings, in addition this MAGNUM upgrade does have an absolutely outstanding O2 sensor control circuit integrated in the unit for those editions fitted with oxygen sensor. This control panel helps to prevent and stop undesired restriction of the ECU. Installation is easy and universal for each model. 1. Locate the IAT (Intake Air Temperature) sensor in the intake. Cut its signal wire and contact the purple wires to the two ends. Direction does not matter. 2. Find the oxygen sensor(s) in the exhaust. 3. Splice blue cables to O2 sensor's signal wire according to the following wiring table. 4. Contact the red cable of doubled wire to the ignition battery + 12V, and the black thread to the ground or battery negative. Magnum Tuning has been dealing with manufacture of ECU upgrades and performance parts since 1994. Our experience warrants peak performance, reliability & perfect style.......... www. carperformance.us